Nov. 23 , 13:15 - 14:45
Poseter Session
Y-based Superconductors

Chairman: NAGATA, Akihiko and TORII Shinji


    E1-01
  1. Critical current density and 3rd harmonic response in superconductors
    MAWATARI,Yasunori et al. ( National Institute of Advanced Industrial Science and Technology ), y.mawatari@aist.go.jp
  2. E1-02

  3. Reaction and microstructure of YBCOby metalorganic deposition using trifluoroacetate
    Yamada,Yutaka et al. ( ISTEC-SRL ), yyamada@istec.or.jp
  4. E1-03

  5. Superconducting properties of GdBa2Cu3O7-y films fabricated by the TFA-MOD method
    IGUCHI,Toshihiro et al. ( Department of Crystalline Materials Science, Nagoya University ), iguchi@istec.or.jp
  6. E1-04

  7. YBCO film on Ni alloy tape by low temperature LPE
    Yamada,Yasuji et al. ( SRL/ISTEC ), yamada@istec.or.jp
  8. E1-05

  9. Superconducting property of YBCO films on silver substrates by CVD Technique
    ONABE, Kazunori et al. ( Fujikura Ltd. ), onabe@rd.fujikura.co.jp
  10. E1-06

  11. {110}<110> textured Ag tapes and the Y-123 films prepared on them
    MORI,Yuji et al. ( Kagoshima University ), doi@eee.kagoshima-u.ac.jp
  12. E1-07

  13. Nd-123 films prepared on {100}<001> textured Ag tapes
    NISHIDA,Tomoya et al. ( Kagoshima University ), doi@eee.kagoshima-u.ac.jp

Nov. 23 , 13:15 - 14:45
Poseter Session
AC Loss

Chairman: SUMIYOSHI, Fumio and TASAKI, Kenji


    E1-08
  1. Analysis on the thermal stability of Bi-2223 HTSC tape impregnated with solid nitrogen by finite difference method
    FUJIO,Akihisa et al. ( Kyoto University ), tk_naka@kuee.kyoto-u.ac.jp
  2. E1-09

  3. Measurement of AC losses using saddle shaped pickup-coil
    Nanri,Masahiro et al. ( Kyushu University ), nan@sc.kyushu-u.ac.jp
  4. E1-10

  5. AC loss analysis of oxide superconducting wires by the finite element method
    HAYASHI,Toshihiro et al. ( Kyushu University ), hayashi@sc.kyushu-u.ac.jp
  6. E1-11

  7. AC loss measurement of HTS wire subject to AC longitudinal magnetic field
    OGAWA, Jun et al. ( Yokohama National Univ. ), jun@tsukalab.dnj.ynu.ac.jp

Nov. 23 , 13:15 - 14:45
Poseter Session
SC Magnet & Application

Chairman: HIGUCHI, Noboru and OTABE, Soji


    E1-12
  1. Design of persistent-current switch (PCS) for HTS
    KUWANO,Katsuyuki et al. ( CENTRAL JAPAN RAILWAY COMPANY ), m.igarashi@jr-central.co.jp
  2. E1-13

  3. Development of persistent-current switch (PCS) with YBCO film
    TOSAKA,Taizo et al. ( Toshiba ), m.igarashi@jr-central.co.jp
  4. E1-14

  5. Studies on a Toroidal-type SMES with a Normalconducting Shield coil
    HORIUCHI, Yoko et al. ( Oita University ), yhori@oita-cc.cc.oita-u.ac.jp
  6. E1-17

  7. Development of Fundamental Technologye for More Compact and Larger Capacity Superconducting Generator
    NISHIJIMA,kenichi et al. ( Engineering Reseach Association for Superconductive Generation Equipment and Materials ), hiroyuki_sato@pis.hitachi.co.jp
  8. E1-18

  9. V-t characteristics of electirical insulation materials for HTS Power Transmission Cables
    YAGI,Masashi et al. ( The Furukawa Electric CO., LTD. ), m-yagi@ch.furukawa.co.jp
  10. E1-24

  11. AC Losses in Parallel Conductors (9)-Additional Losses in Saturation Resion-
    MATSUDA,Kouki et al. ( Kyushu University ), k-mat@sc.kyushu-u.ac.jp
  12. E1-28

  13. Development of low-heat-leak pertier current lead (3)--Operation characteristics for half wave rectified current
    NAKAMURA,Keiji et al. ( Department of Electrical Engineering, College of Engineering, Chubu University ), nakamura@solan.chubu.ac.jp
  14. E1-31

  15. Design of superconducting magnets for continus change of field-direction (3)
    MATSUMOTO,Shinji et al. ( Nationaol Institute for Materials Science ), MATSUMOTO.Shinji@nims.go.jp
  16. E1-32

  17. Feeder for ITER Magnet System
    Yoshida,Kiyoshi et al. ( ITER-CTA ), yoshida@naka.jaeri.go.jp

Nov. 23 , 13:15 - 14:45
Poseter Session
Current Limiters/ Bulk Materials Application

Chairman: KAIHO, Katsuyuki and HOSHINO Tsutomu


    E1-15
  1. Trial production of linear synchronous actuator with field-cooled HTS bulk secondary
    TAKAHASHI,Atsushi et al. ( Department of EECE,Waseda University ), atsushi@mn.waseda.ac.jp
  2. E1-16

  3. Comparison of characteristics of a motor using bulk superconductors in the rotor in the transient and normal states
    TSUBOI,Yuichi et al. ( The University of Tokyo ), tsuboi@ohsaki.t.u-tokyo.ac.jp
  4. E1-19 Submitted to Japan-Korea Joint Workshop 2001

  5. Stability of Fault Current Limiter with Conduction Cooled Bi2223 Screen
    SASAKI,Ken-ichi et al. ( Graduate school of engineering, Hokkaido University ), ksasaki@eng.hokudai.ac.jp
  6. E1-20

  7. Generating Characteristics of Flux Flow Resistance in Bi2223 High Tc Superconducting Bulk
    SHIMIZU,Hirotaka et al. ( Nagoya University ), hshimizu@nuee.nagoya-u.ac.jp
  8. E1-21

  9. FEM analysis of resistive superconducting thin film current limiting devices using current vector potential method
    SUGITA,Shinya et al. ( Department of Electrical Engineering, The University of Tokyo ), sugita@ohsaki.t.u-tokyo.ac.jp
  10. E1-22

  11. Study on L-R Hybrid Type Superconducting Fault Current Limiting Interrupter
    SATO,Takao et al. ( Niigata University ), takaos@eng.niigata-u.ac.jp
  12. E1-23

  13. HTc Superconducting AC Coil for LC Resonance Type Fault Current Limiter
    FURUSE,Mitsuho et al. ( National Institute of Advanced Industrial Science and Technology ), m.furuse@aist.go.jp
  14. E1-25

  15. Trapped Field Characteristics of Y-Ba-Cu-O Bulk in Time-varying External Magnetic Field
    UEDA,Hiroshi et al. ( Ishiyama Laboratory, Department of EECE, Waseda University ), ueda@super.elec.waseda.ac.jp
  16. E1-26

  17. Magnetic Levitation with High-Tc Superconductor and multiple electromagnets
    KAMOSHIDA,ryota et al. ( Department of EECE, Waseda University ), atsushi@mn.waseda.ac.jp
  18. E1-27

  19. Resin-Impregnated bulk-superconductor current leads for MAGLEV
    TOMITA, Masaru et al. ( Superconductivity Research Laboratory ), tomita@istec.or.jp
  20. E1-29

  21. Effect of shielding current dependence on magnetic field for stress distribution
    TSUCHIMOTO,Masanori et al. ( Hokkaido Institute of Technology ), tsuchi@hit.ac.jp
  22. E1-30

  23. Homogeneous Magnetic Field Generation by High-Tc Bulk Superconductors
    YOKOYAMA,Kazuya et al. ( Iwate Industrial Promotion Center ), yoko@iwate-techno.com
  24. E1-33

  25. The fast current limiting action of the magnetic shield type superconducting fault current limiter
    KAWASUMI,Masahiro et al. ( Hokkaido University ), kawasumi@kiki-si.eng.hokudai.ac.jp
  26. E1-34

  27. An Examination of Bias Power Supplies for Fault Current Limiters Using Superconducting Reactors
    NOMURA,Takahiro et al. ( Niigata University Graduate School of Science and Technology ), tnomnom@mba.sphere.ne.jp
  28. E1-35

  29. Simulation analysis of one machine infinite bus system with Superconducting fault current limiter
    TAGUCHI,Masaumi et al. ( Kyoto University ), taguchi@pe.energy.kyoto-u.ac.jp
  30. E1-36

  31. Characteristics of Superconducting Magnetic Levitation System for the Goods Transpotation vehicle
    OKANO,Makoto et al. ( National Institute of Advanced Industrial Science and Technology ), m-okano@aist.go.jp

Nov. 23 , 13:15 - 14:45
Poseter Session
Measurement & Control (I)

Chairman: ISHIGOKA, Takeshi and OGATA, Toshio


    E1-37
  1. Jc-B-T Test facility using oxide superconductor
    Masaichi Umeda et al. ( National Institute of Advanced Industrial Science and Technology ), Masaich Umeda
  2. E1-38

  3. The Aparatus for Evaluation of The Superconducting Joint Resistance of The Oxide Superconducting Wires by Using 10K Cryocooler
    Ogawa Rikuo et al. ( Hakodate National College of Technology, Department of Electrical and Electronic Engineering ), ogawa@hakodate-ct.ac.jp
  4. E1-39

  5. Development of a laser interferometric measurement system for thermal expansion and magnetosrtiction at cryogenic temperatures
    YAMADA, Naofumi et al. ( National Institute of Advanced Industrial Science and Technology ), naofumi-yamada@aist.go.jp
  6. E1-40

  7. Development of an adiabatic calororimetry system for heat capacity measurement at cryogenic temperatures
    KATO, Hideyuki et al. ( National Institute of Advanced Industrial Science and Technology ), kato-hideyuki@aist.go.jp
  8. E1-41

  9. Study of liquid volume measurement for cryogens under micro-gravity conditions.
    NAKANO,Akihiro et al. ( National Institute of Advanced Industrial Science and Technology ), a.nakano@aist.go.jp

Nov. 24 , 13:15 - 14:45
Poseter Session
Bi-based Superconductors

Chairman: SASAOKA, Takaaki and SATO, Mitsunori


    E2-01
  1. Subgrain structures in RE123 bulk superconductors and their effects on superconducting properties
    OGASAWARA,Kei et al. ( Superconductivity Research Laboratory ), czn00206@nifty.com
  2. E2-02

  3. Grain Alighment Control of Bi2212tape by Te Dope
    UEHARA, Ryouhei et al. ( Kitami Institute of Technology ), mms00002/mms00@king.cc.kitami-it.ac.jp
  4. E2-03

  5. Diffusion of Pb into Bi2212 phase and its application to Bi2212/Ag tapes
    TOJIMA,Motoki et al. ( Kitami Institute of Technology ), mms01013/mms01@king.cc.kitami-it.ac.jp
  6. E2-04

  7. Improvement in critical current of AgCu-sheathed Bi-2212 wires in long length
    KURODA,Tsuneo et al. ( National Institute for Materials Science ), KURODA.Tsuneo@nims.go.jp
  8. E2-05

  9. The Influence of The Pre-Heat Treatment Conditions on The Critical Currents of The Multi-filamentary Bi2212 Wires
    Ogawa Rikuo et al. ( Hakodate National College of Technology, Department of Electrical and Electronic Engineering ), ogawa@hakodate-ct.ac.jp
  10. E2-06

  11. Effect of CIP on superconducting properties of Bi-2223/Ag wires composite bulk
    HIRANO,Shinji et al. ( Advanced Materials R&D Center,Meisei University ), 01m2011@chem.meisei-u.ac.jp
  12. E2-07

  13. Jc properties of Bi-2223 thick films on a MgO substrate prepared by a coating method
    Ichikawa,Michiharu et al. ( Central Research Institute of Electric Power Industry ), michi@criepi.denken.or.jp
  14. E2-08

  15. Influence of Ca2CuO3 doping on Jc in Ag-sheathed Bi2223 tapes
    YAMAMOTO,Tatsuya et al. ( Toyohashi University of Technology ), t-yamamoto@super.eee.tut.ac.jp

Nov. 24 , 13:15 - 14:45
Poseter Session
Superconducting materials

Chairman: MATSUSHITA, Teruo and TAKEUCHI Takao


    E2-09
  1. Effect of periodic flux pinning centers in Nb films by the photo-lithography III
    Iwamoto,Tadashi et al. ( Faculty of Engineering,Yamaguchi University ), b7926@stu.cc.yamaguchi-u.ac.jp
  2. E2-10

  3. Irreversibility Fields of Nb-Ti Multifilamentary Composites with Dfferent APC Materials(2)
    ZHU,Yun et al. ( Graduate School of Engineering, Tokyo Metropolitan University ), zhuyun@ecomp.metro-u.ac.jp
  4. E2-11

  5. Intergrain Superconducting Transition in Chalcogenides AXV6S8(A=In,Tl,K,Rb,Cs)
    SUGINO,Masahiro et al. ( Department of Applied Physics,Okayama University of Science ), s01pm05@physics.dap.ous.ac.jp
  6. E2-12

  7. Critical Current Densities and Hysteresis Losses of Multifilamentary Nb3Sn Strands
    Mizuno,Kenichiro et al. ( College og Science and Technology Nihon University ), mizutti10@hotmail.com

Nov. 24 , 13:15 - 14:45
Poseter Session
SC Coils

Chairman: OGITSU, Toru and TSUDA, Makoto


    E2-13
  1. Current equalization of multi-stranded conductor by T-connection reactor
    NAGASAWA,Toru et al. ( Niigata University ), fzj01347@nifty.ne.jp
  2. E2-14

  3. Relation between inter-sub-cable contact resistance and coupling loss in multiple-stage stranded cable
    SEO, Kazutaka et al. ( Mitsubishi Elec. Corp., Advanced Technology R&D Center ), seo@ele.crl.melco.co.jp
  4. E2-15

  5. Stablity of a field winding of superconducting generator under changeing magnetic field
    kaiho,katsuyuki et al. ( National Institute of Advanced Science and Technology ), k-kaiho@aist.go.jp
  6. E2-16

  7. Feasibility study of large superconducting coils wound of transposed parallel conductors
    Gyoutoku,Kenichi et al. ( Department of EESE,Kyushu University ), gyoutoku@sc.kyushu-u.ac.jp
  8. E2-17

  9. Properties of cryocooler-cooled super conducting pulse coil (5)
    MIYAZAKI,Hiroshi et al. ( Kyushu-University ), miyazaki@sc.kyushu-u.ac.jp
  10. E2-18

  11. Performance Estimation of Cryocooler-cooled HTS coil for SMES
    ISOMINE,Kouji et al. ( Depatment of EECE , Waseda University ), 601c0141@mn.waseda.ac.jp
  12. E2-19

  13. Durability of High-Tc superconducting coil against pulsive excess current
    OHASHI,SATORU et al. ( Tokyo Institute of Technology Interdisciplinary Graduate School of Science and Engineering ), rs112579@dk.catv.ne.jp
  14. E2-20

  15. Study of Stabilization and Quench Protection for HTS coil
    FU,Youkun et al. ( Yokohama National University ), fuy@tsukalab.dnj.ynu.ac.jp
  16. E2-21 Submitted to Japan-Korea Joint Workshop 2001

  17. The influence of hard bending strain on the properties of Bi-2223/Ag HTS tapes
    Ha,Hong-Soo et al. ( Applied superconductivity Lab., Korea Electrotechnology Research Institute ), hsha@keri.re.kr

Nov. 24 , 13:15 - 14:45
Poseter Session
Cooling System & Refrigerator

Chairman: SATO, Akio and OHMORI Takao


    E2-22 Submitted to Japan-Korea Joint Workshop 2001
  1. Counter Flow Cooling Characteristics with Liquid Nitrogen for Superconducting Power Cables
    FURUSE,Mitsuho et al. ( National Institute of Advanced Industrial Science and Technology ), m.furuse@aist.go.jp
  2. E2-23

  3. Energy conversion mechanism in a water Stirling engine
    BIWA,Tetsushi et al. ( Crystalline Materials Science, Nagoya University ), biwa@mizu.xtal.nagoya-u.ac.jp
  4. E2-24

  5. A thermoacoustic Stirling cooler
    UEDA,Yuki et al. ( Nagoya University ), ueda@mizu.xtal.nagoya-u.ac.jp
  6. E2-25 Submitted to Japan-Korea Joint Workshop 2001

  7. The effect of the operating frequency and the length of the split tube for the Stirling cryocooler
    Koh,Deuk-Yong et al. ( Korea Institute of Machinary and Materials (KIMM) ), dykoh@mailgw.kimm.re.kr
  8. E2-26

  9. Development of a Small 4K-GM Cryocooler
    SATOH,Toshimi et al. ( Sumitomo Heavy Industries, Ltd. R&D Center ), Tsm_Sato@shi.co.jp
  10. E2-27

  11. The development of the 3He circulation-type GM-JT 1K cryogenic refrigerator
    YAMADA,Yuh et al. ( Interdisciplinary Faculty of Sci. and Eng.: Shimane University ), yamada@riko.shimane-u.ac.jp
  12. E2-29 Submitted to Japan-Korea Joint Workshop 2001

  13. Optimum charging pressure and operating frequency in the Stirling Cryocooler
    Park Seong-Je et al. ( Korea Institute of Machinery & Materials (KIMM) ), sjpark@kimm.re.kr
  14. E2-30 Submitted to Japan-Korea Joint Workshop 2001

  15. A Study on the linear Compressor Characteristics of The Stirling Refrigerator
    Koh,Deuk-Yong et al. ( Korea Institute of Mchinery and Materials (KIMM) ), dykoh@mailgw.kimm.re.kr
  16. E2-31

  17. He II cryogenic system in NIFS
    Maekawa,Ryuji et al. ( National Institute for Fusion Science ), maekawa@lhd.nifs.ac.jp
  18. E2-32

  19. Forced Convection Heat Transfer of Pressurized He II, Part 1; Apparatus and Results of Transient Heat Transfer
    Hata,Koichi et al. ( Institute of Advanced Energy, Kyoto University ), hata@iae.kyoto-u.ac.jp
  20. E2-33

  21. Forced Convection Heat Transfer of Pressurized He II, Part 2; Steady-state Heat Transfer and Its Critical Heat Flux
    Okamura,Takahiro et al. ( Dept. of Energy Science and Technology, Kyoto University ), shiotsu@uji.energy.kyoto-u.ac.jp
  22. E2-34

  23. Characteristics of cryostat using multi shell insulation
    AKAMATSU,Takeshi et al. ( Department of EECE, Waseda University ), takeshi@super.elec.waseda.ac.jp
  24. E2-35 Submitted to Japan-Korea Joint Workshop 2001

  25. Electrical breakdown characteristics of LN2 for superconducting power apparatus
    Baek,Seung-Myeong et al. ( Dept of Electrical Eng Gyeongsang National University ), trebari@hanmail.net
  26. E2-36 Submitted to Japan-Korea Joint Workshop 2001

  27. Surface flashover characteristics in Liquid Nitrogen for application of superconducting pancake coils.
    Jeong,Jong-Man et al. ( Dept of Electrical Eng Gyeongsang National University. ), jjmany@hanmail.net