Nov. 23 , 9:00 - 10:30
Room B
Magnet Technology

Chairman: TAKAHASHI, Yoshikazu and


    B1-01
  1. Development of a Superconducting Magnet for Scientific Observation in Space (4) -Development of Small Size High-Strength Aluminum Stabilized Superconducting Wires-
    KIKUCHI,Kenichi et al. ( Hitachi Cable, Ltd. ), kikuchi.kenichi@hitachi-cable.co.jp
  2. B1-02

  3. Development of an thin superconducting solenoid for particle astrophysics (5) Test result of model coil .
    OHOMIYA,Hidenori et al. ( Tokyo scientific university ), yasuhiro.makida@kek.jp
  4. B1-03

  5. Development of Superconducting Magnets for Uniform and High Magnetic Force Field Generation 1. Design and Electromagnetic Properties
    OZAKI,Osamu et al. ( National Institute for Materials Science ), ozaki.osamu@nims.go.jp
  6. B1-04

  7. Development of superconducting magnets for uniform and high magnetic force field generation 2. Cooling performance
    KOYANAGI,Kei et al. ( National Institute for Materials Science ), koyanagi.kei@nims.go.jp
  8. B1-05

  9. Development of a superconducting magnet used in a high-level radiation
    OHNISHI,Hiroyuki et al. ( Kyushu University ), ohnishih@post.kek.jp
  10. B1-07

  11. Development of 1 GHz NMR magnet (V)-field stability and homogeneity at 920MHz-
    KIYOSHI,Tsukasa et al. ( National Institute for Materials Science ), KIYOSHI.tsukasa@nims.go.jp

Nov. 23 , 10:45 - 12:15
Room B
Supeconductor's Properties

Chairman: MITO, Toshiyuki and KATO, Takashi


    B1-08
  1. Experimental Observation of Strand Movements in Cable-in-conduit Conductors (2)
    TAKAHATA,Kazuya et al. ( National Institute for Fusion Science ), takahata@nifs.ac.jp
  2. B1-09

  3. Behavior of current redistribution in twisted cables under various helium conditions
    MORI,Toshiyuki et al. ( Graduate University for Advanced Studies ), mori-t@nifs.ac.jp
  4. B1-10

  5. Monte carlo simulation of stability and mechanical properties in the CS-coil
    Aoki,Kosuke et al. ( Department of Nuclear Engineering,Graduate School of Engineering,Osaka University ), aoki35@sanken.osaka-u.ac.jp
  6. B1-11

  7. calculation of helical magnetic field for the superconducting multifilamentary composites (2)
    TOMINAKA, Toshiharu et al. ( institute of physical & chemical research (riken) ), tominaka@postman.riken.go.jp
  8. B1-12

  9. Measurement of dynamic normal zone propagating currents of aluminum stabilized conductors.
    Imagawa, Shinsaku et al. ( National Institute for Fusion Science ), imagawa@lhd.nifs.ac.jp
  10. B1-13

  11. AC loss performance on strain of CIC conductor for fusion facility
    MATSUI,Kunihiro et al. ( Japan Atomic Energy Research Institute ), matsuik@fusion.naka.jaeri.go.jp

Nov. 23 , 15:00 - 16:00
Room B
LHD

Chairman: ONISHI, Toshitada and KAMIJO, Hiroki


    B1-14
  1. Present Status of the Operations of the Superconducting Magnets for the Large Helical Device -Autumn 2001-
    Satow, Takashi et al. ( National Institute for Fusion Science ), satotaka@LHD.nifs.ac.jp
  2. B1-15

  3. Consideration of the position of normal zone propagation in the helical coil of the Large Helical Device.
    Imagawa, Shinsaku et al. ( National Institute for Fusion Science ), imagawa@lhd.nifs.ac.jp
  4. B1-16

  5. Analysis on the Mechanical Properties of the LHD Helical Coils using Pulse Height Analysis
    Yanagi, Nagato et al. ( National Institute for Fusion Science ), yanagi@nifs.ac.jp
  6. B1-17

  7. AC losses of LHD poloidal coils (3)
    TAKAHATA,Kazuya et al. ( National Institute for Fusion Science ), takahata@nifs.ac.jp

Nov. 23 , 16:15 - 17:15
Room B
Bulk Materials Application

Chairman: KUBOTA, Hiroshi and ARAI, Kazuaki


    B1-18
  1. Stady of The Thermal Stress Strength in A Bulk High Tc Superconductor
    TAKASHIMA,Hideyoshi et al. ( Hokkaido University ), taka_koba@nifty.com
  2. B1-19

  3. Characteristics evaluation of Levitating X-Y Transporter using HTS Bulks
    AKAMATSU,Takeshi et al. ( Department of EECE, Waseda University ), takeshi@super.elec.waseda.ac.jp
  4. B1-20

  5. Assessment of Load Characteristic and Flux-trapping Condition in Active Magnetic Levitation
    TAMURA,Masahiro et al. ( Yamaguchi University Faculty of Engineering Electrical and Electronic eng. ), tsuda@po.cc.yamaguchi-u.ac.jp
  6. B1-21

  7. Repeated field-cooling magnetization with temperature control in a high-Tc superconducting bulk
    KAMIJO,Hiroki et al. ( Railway Technical Research Institute ), hiroki@rtri.or.jp

Nov. 24 , 9:00 - 10:30
Room B
ITER

Chairman: IMAGAWA, Shinsaku and YANAGI, Nagato


    B2-01
  1. Thermohydmulic Properties of the TF Insert Coil
    KAWANO, Katsumi et al. ( Japan Atomic Energy Research Institute, Naka Fusion Research Establishment ), kawanoka@naka.jaeri.go.jp
  2. B2-02

  3. Completion of TF insert fabrication and status of its performance test under the collaboration between Japan and Russia
    SUGIMOTO Makoto et al. ( Japan Atomic Energy Research Institute ), sugimoto@naka.jaeri.go.jp
  4. B2-03

  5. Achievement of feasibility study and R&D on fabrication of ITER Superconducting Magnets
    HAMADA, Kazuya et al. ( Japan Atomic Energy Research Institute ), hamada@naka.jaeri.go.jp
  6. B2-04

  7. Achievements Obtained in the ITER CS Model Coil
    KATO, Takashi et al. ( Japan Atomic Energy Research Institute ), kato@naka.jaeri.go.jp
  8. B2-05

  9. Correlation among energy of acoustic emission, rearrangements of cables and AC losses.
    ARAI,Kazuaki et al. ( National Institute of Advanced Industrial Science and Technology ), kazuaki-arai@aist.go.jp
  10. B2-06

  11. Effect of Transport Current on Pulse Field Losses in ITER-CS Insert Coil (2)
    TAKAHASHI, Yoshikazu et al. ( ITER-IT ), takahasi@naka.jaeri.go.jp

Nov. 24 , 10:45 - 12:15
Room B
Accelerators

Chairman: YOSHIDA, Kiyoshi and TAKAHATA, Kazuya


    B2-07
  1. Development and performance test of the ATLAS superconducting solenoid magnet.
    DOI,Yoshikuni et al. ( High Energy Accelerator Research Organization (KEK) ), ydoi@post.kek.jp
  2. B2-08

  3. Mechanical and Thermal Characteristics of the ATLAS Central Solenoid
    MIZUMAKI,Shoichi et al. ( Toshiba Corporation ), shoichi.mizumaki@toshiba.co.jp
  4. B2-09

  5. Performance test of ATLAS thin superconducting solenoid - superconducting properties
    makida,yasuhiro et al. ( KEK ), yasuhiro.makida@kek.jp
  6. B2-10

  7. Perfomance test result of ATLAS central solenod - control
    kawai ,masanori et al. ( KEK ), masanori.kawai@kek.jp
  8. B2-11

  9. Developement of the insertion quadrupole magnets for CERN-LHC ~Present Status~
    OGITSU,TORU et al. ( High Energy Accelerator Research Organization ), toru.ogitsu@kek.jp
  10. B2-12

  11. Development of superconducting quadrupole magnets for beam-interaction regions at CERN-LHC(17)-Field quality of first production magnet-
    HIRANO, Hiroyuki et al. ( High Energy Accerelator Research Organization ), hiroyuki.hirano@kek.jp

Nov. 25 , 9:00 - 10:30
Room B
Current Limiters

Chairman: TAMADA, Noriharu and SEO Kazutaka


    B3-01
  1. Effect of Control Current on Saturated DC Reactor Type Fault Current Limiter
    SALIM,Khosru Mohammad et al. ( Kyoto University ), tk_naka@kuee.kyoto-u.ac.jp
  2. B3-02

  3. Measurement of current distribution for a fault current limiter using YBCO films
    SHIMOHATA,Kenji et al. ( Advanced Technology R&D Center ), simohata@ele.crl.melco.co.jp
  4. B3-03

  5. Effects of Ic dispersion on connected fault current limiters in series
    KUBOTA,Hiroshi et al. ( Corporate R&D Center, Toshiba Corp. ), hiroshi2.kubota@toshiba.co.jp
  6. B3-04

  7. High-Tc Superconducting Magnet for Fault Current Limiter(2) Cooling Characteristics of Sub-cooled Nitrogen
    YAZAWA,Takashi et al. ( Power and Industrial Sytems Research and Development Center, Toshiba co. ), takashi.yazawa@toshiba.co.jp
  8. B3-05

  9. Multi-Functional SFCL -application to SVC-
    AKIMOTO,Ryo et al. ( Graduate School of Engineering Hokkaido University ), akimoto@kiki-si.eng.hokudai.ac.jp
  10. B3-06

  11. Evaluation of Stabilities in Conduction Cooled Type High Tc Superconducting Fault Current Limiters
    NISHIZAWA,Chihiro et al. ( Hokkaido University ), chihiro@kiki-si.eng.hokudai.ac.jp

Nov. 25 , 10:45 - 12:30
Room B
Power Electronics

Chairman: YAMAGUCHI, Mitsugi and HORIUCHI Yoko


    B3-07
  1. Relationship between torque and magnetic properties of axial-type HTSC motor
    Jung,Hunjune et al. ( Kyoto University ), tk_naka@kuee.kyoto-u.ac.jp
  2. B3-08

  3. Study on Design Method of Superconducting Mchines
    MAKI,Naoki et al. ( Tokai University ), naokmaki@ycc.u-tokai.ac.jp
  4. B3-09

  5. Investigation Study on Applicable Possibility of Superconducting Generators
    MAKI,Naoki et al. ( Tokai University ), naokmaki@ycc.u-tokai.ac.jp
  6. B3-10

  7. Improvement of Levitation Force and Bearing Stiffness
    KOMORI,Mochimitsu et al. ( Kyushu Institute of Technology ), komori@mse.kyutech.ac.jp
  8. B3-11 Submitted to Japan-Korea Joint Workshop 2001

  9. HTS coil shape optimization for its minimum volume condition
    Lee,Joon-Ho et al. ( Sungkyunkwan University ), wsnah@yurim.skku.ac.kr
  10. B3-12

  11. Test of 1000A Class Small Oxide Superconducting Transformer for Measurement Cooled by Cryocooler
    OTABE, Edmund Soji et al. ( Kyushu Institute of Technology ), otabe@cse.kyutech.ac.jp
  12. B3-13 Submitted to Japan-Korea Joint Workshop 2001

  13. Development of an irradiation apparatus with catheter transmitting submillimeter wave for living bodies using a gyrotron
    TATSUKAWA,TOSHIAKI et al. ( Kagawa medical university ), tatu@kms.ac.jp

Nov. 25 , 13:15 - 14:45
Room B
Magnetic Separation

Chairman: ISOJIMA, Shigeki and MAKI Naoki


    B3-14
  1. Performance of Trapped Field of High-Tc Bulk Superconductors for Magnetic Separator
    SAHO,Norihide et al. ( Hotachi, Ltd.,Mechanical Engineering Research Laboratory ), saho@merl.hitachi.co.jp
  2. B3-15

  3. High Gradient Magnetic Separation for Weakly Magnetized Fine Particles
    OKADA,Hidehiko et al. ( Iwate Industrial Promotion Center ), okada@iwate-techno.com
  4. B3-16

  5. Development of High-Tc Bulk-Superconductor-Based Magnetic Separator for Water Purification
    SAHO,Norihide et al. ( Hitachi, Ltd. Mechanical Engineering Research Laboratory ), saho@merl.hitachi.co.jp
  6. B3-17

  7. Removal Performance of High-Tc Bulk-Based Magnetic Separator for Water Bloom
    SAHO,Norihide et al. ( Hitachi, Ltd., Mechanical Engneering Reserch Laboratory ), saho@merl.hitachi.co.jp
  8. B3-18

  9. Oil Removal Performance of Magnetic Separation for Water Contaminated by Oil
    ISOGAMI,Hisashi et al. ( Mechanical Engineering Research Laboratory, Hitachi, Ltd. ), isogami@merl.hitachi.co.jp
  10. B3-19

  11. Recovery of Abrasives from Wasted Surry by Superconducting
    NISHIJIMA,Shigehiro et al. ( Department of Nuclear Engineering, Graduate School of Engineering, Osaka University ), nishijim@nucl.eng.osaka-u.ac.jp

Nov. 25 , 15:00 - 16:30
Room B
Cable/Leads

Chairman: SAHO Norihide and MUKOYAMA, Shinichi


    B3-20
  1. Development of a 100m, 3-core 114MVA HTSC Cable Systems(1)
    YUMURA,Hiroyasu et al. ( Sumitomo Electric Industries, Ltd. ), yumura-hiroyasu@sei.co.jp
  2. B3-21

  3. Development of a 100m, 3-core 114MVA HTSC Cable System (2)
    YUMURA,Hiroyasu et al. ( Sumitomo Electric Industries, Ltd. ), yumura-hiroyasu@sei.co.jp
  4. B3-22

  5. Current Distribution in a High-Tc Superconducting Cable Considering Nonliner Characteristic of High-Tc Superconducting Tape
    Ito,Yasutaka et al. ( Yamaguchi University Faculty of Engineering Electrical and Electronic Eng. ), tsuda@po.cc.yamaguchi-u.ac.jp
  6. B3-23

  7. Development of HTS current feeders for large-scale superconducting
    MITO,Toshiyuki et al. ( National Institute for Fusion Science ), mito@nifs.ac.jp
  8. B3-24

  9. Development of Low-Heat-Leak Peltier Current Lead (1) --Operation Characteristics under Liquid Nitrogen Circumstance--
    NAKAMURA,keiji et al. ( Department of Electrical Engineering, College of Engineering, Chubu University ), nakamura@solan.chubu.ac.jp
  10. B3-25

  11. Development of Low-Heat-Leak Peltier Current Lead(2) --Operation Characteristics under Liquid Herium Circumstance--
    YAMAGUCHI,Takayuki et al. ( Department of Electrical Engineering, College of Engineering, Chubu University. ), tyama@isc.chubu.ac.jp